RK3576 NFC payment handheld POS board Compact for Saudi Buyers - Wholesale Payment Security Biometri

As of September 29, 2026, the RK3576-PY110 leaves Shenzhen for Saudi importers under Wanlin Group's 2026 Payment Security Biometric and Contactless POS Boards export program, shipping with Rockchip RK3576 octa-core SoC, 8GB LPDDR4X + 64GB eMMC, 6-inch MIPI DSI touch, Android 13.0 with multi-language UI, Dual-band WiFi with Bluetooth 5.2 and 4G LTE on an optional daughter board: 8GB LPDDR4X + 64GB eMMC, with secure handheld payment terminals where face recognition, fingerprint authorisation, NFC contactless, EMV chip and magnetic stripe all settle through a hardware secured path with secure boot, tamper inputs and key storage, built for the way Saudi merchants and field teams actually work. Wanlin Group as the handheld POS board supplier, exporter and original manufacturer now serves local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets, and this export program is open to Saudi buyers ordering at factory-direct terms.

Core parameters: Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU. CPU 4x ARM Cortex-A72 up to 2.2GHz plus 4x ARM Cortex-A53, big.LITTLE. GPU ARM Mali-G52 MC3 GPU, OpenGL ES 3.2 / Vulkan 1.1. Render and security path Mali-G52 MC3 render path with the 6 TOPS NPU handling face detection, barcode pre-processing and receipt OCR on device. Video decode Hardware decode up to 8K@30fps and 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for video proof capture and dispute evidence. Camera input MIPI CSI camera input for face recognition cameras, document capture and scan-engine assist. Memory and storage 8GB LPDDR4X + 64GB eMMC. Operating system Android 13.0 with multi-language UI, OTA upgrade and remote device management agent. Display and touch 6-inch 1080x2160 MIPI DSI panel with capacitive multi-touch and glove-mode tuning. Audio and signalling Speaker with voice broadcast of amount and payment result in the selected language. Interfaces and I/O 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion. Networking Dual-band WiFi with Bluetooth 5.2 and 4G LTE on an optional daughter board. Power input Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty. Duty profile Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes. PCB Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port. Certifications CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support. Wanlin's 2026 export roadmap for Saudi also covers custom memory and storage combos, printer and scan engine interface selection, contactless antenna placement, custom peripheral drivers, private-label branding and per-destination certification documentation packages.

Executive Summary - Payment Security Biometric and Contactless POS Boards Export for Global B2B Buyers

Executive summary - 10 buyer-relevant points:

• Featured model RK3576-PY110, Payment Security Biometric and Contactless POS Boards, Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU
• CPU 4x ARM Cortex-A72 up to 2.2GHz plus 4x ARM Cortex-A53, big.LITTLE
• GPU ARM Mali-G52 MC3 GPU, OpenGL ES 3.2 / Vulkan 1.1
• Render and security path Mali-G52 MC3 render path with the 6 TOPS NPU handling face detection, barcode pre-processing and receipt OCR on device
• Video decode Hardware decode up to 8K@30fps and 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for video proof capture and dispute evidence
• Memory and storage 8GB LPDDR4X + 64GB eMMC
• OS Android 13.0 with multi-language UI, OTA upgrade and remote device management agent
• Display and touch 6-inch 1080x2160 MIPI DSI panel with capacitive multi-touch and glove-mode tuning
• MOQ 100 pcs, lead time 20-30 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
• Field reference: bank acquiring with PSAM card slots - key loading errors at merchant sites fell to zero
• Target buyer: payment scheme certified terminal makers, biometric product vendors, bank acquiring departments, secure payment device importers and regional Android board distributors
• Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

This note is written for cross-border buyers comparing Payment Security Biometric and Contactless POS Boards factories in China on evidence instead of brochure language. Wanlin Group operates its own 12,000 m2 manufacturing facility in Shenzhen with 8 SMT lines, 4 AOI inspection stations and 2,400 m2 of cleanroom assembly, exporting handheld POS boards to 60+ countries under the AndroidSBC brand. Total cost of ownership for an AndroidSBC Payment Security Biometric and Contactless POS Boards deployment typically runs 42-60% below x86-based cashier hardware once per-device OS licensing and patch handling are counted. For Saudi, this article maps the model line, the economics and the compliance route specific to your market.

Global Payment Security Biometric and Contactless POS Boards Market Overview and 2026 Buyer Demand

Buyers shortlisting secure handhelds rank tamper response, key storage and antenna tuning above raw CPU tier. Antenna tuning inside the closed enclosure decides first-tap read rate, which is the number passengers and shoppers actually feel.

Regional compliance for Saudi is anchored on SASO / SABER conformity certificates and Saudi radio type approval. Cross-border buyers are advised to verify the certification scope, the contactless behaviour and the software build of every board before import, since some China-supplied boards ship without destination radio approval, without the payment documentation the acquirer asks for, or without the Android build the project actually needs, and any of those gaps can stall customs clearance or a scheme review.

Reference: Wanlin Group 2026 handheld POS export program documentation, Rockchip and Allwinner platform datasheets, field deployment records 2024-2026.

Payment Security Biometric and Contactless POS Boards Engineering Architecture and Hardware Platform

The handheld POS family is engineered on three pillars: (1) an Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU compute block with Mali-G52 MC3 render path with the 6 TOPS NPU handling face detection, barcode pre-processing and receipt OCR on device; (2) a display and capture pipeline built around Hardware decode up to 8K@30fps and 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for video proof capture and dispute evidence; (3) a software layer pairing Android 13.0 with multi-language UI, OTA upgrade and remote device management agent with OTA tooling, device management and the Rockchip RK3576 Android BSP, AOSP build support, peripheral driver kit and the AndroidSBC SDK kit. This architecture delivers continuous field duty on battery at a cost point that undercuts cashier PCs while keeping the payment, print and scan response operators expect.

Three sub-modules define the engineering depth:

• Compute module - Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU. 4x ARM Cortex-A72 up to 2.2GHz plus 4x ARM Cortex-A53, big.LITTLE handles payment UI, catalogue screens, signature capture and on-device vision work inside a fanless handheld shell.
• Display and capture module - 6-inch 1080x2160 MIPI DSI panel with capacitive multi-touch and glove-mode tuning. MIPI CSI camera input for face recognition cameras, document capture and scan-engine assist covers the camera input used for face payment, document capture and proof of delivery, so one device closes the transaction and records the evidence.
• Peripheral and management module - 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion. Headless recovery is supported through the USB service path, and the toolchain covers Rockchip RK3576 Android BSP, AOSP build support, peripheral driver kit and the AndroidSBC SDK kit, OTA upgrade, boot animation customization, pre-installed app support and launcher customization for remote fleet management.

Mechanically the board is a Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port, which is why it drops into handheld shells, vehicle cradles and belt-worn cases without a tooling change.

Featured Model - RK3576-PY110 Compact Technical Signature

The featured model is RK3576-PY110, part of the Payment Security Biometric and Contactless POS Boards family, configured in this batch with 8GB LPDDR4X memory and 64GB eMMC storage. FOB Shenzhen reference price is $143.50 per piece at MOQ 100 pcs, with bulk tier pricing from $123.41 to $160.72 depending on memory and storage combination, radio set, regional certification and packaging artwork. Lead time is 20-30 days from PO confirmation and 30% T/T deposit receipt, with a 24-month warranty.

The technical signature of RK3576-PY110 on this configuration is documented below. Every parameter is verified by our Shenzhen lab against the printer duty profile, the contactless read behaviour of the final enclosure and the electrical limits of IEC / UL 62368-1.

Specification	Value
soc_platform	Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU
cpu_core	4x ARM Cortex-A72 up to 2.2GHz plus 4x ARM Cortex-A53, big.LITTLE
gpu_3d	ARM Mali-G52 MC3 GPU, OpenGL ES 3.2 / Vulkan 1.1
render_security_path	Mali-G52 MC3 render path with the 6 TOPS NPU handling face detection, barcode pre-processing and receipt OCR on device
video_decode	Hardware decode up to 8K@30fps and 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for video proof capture and dispute evidence
camera_input	MIPI CSI camera input for face recognition cameras, document capture and scan-engine assist
memory_storage	8GB LPDDR4X + 64GB eMMC
os_android	Android 13.0 with multi-language UI, OTA upgrade and remote device management agent
display_touch	6-inch 1080x2160 MIPI DSI panel with capacitive multi-touch and glove-mode tuning
audio_signalling	Speaker with voice broadcast of amount and payment result in the selected language
interfaces_io	1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion
networking	Dual-band WiFi with Bluetooth 5.2 and 4G LTE on an optional daughter board
power_input	Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty
duty_profile	Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes
pcb_mechanics	Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port
certifications	CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support
use_case	secure handheld payment terminals where face recognition, fingerprint authorisation, NFC contactless, EMV chip and magnetic stripe all settle through a hardware secured path with secure boot, tamper inputs and key storage

Payment Security Biometric and Contactless POS Boards Application Scenarios across Deployment Sites

The Payment Security Biometric and Contactless POS Boards below are running in live deployments. Each line names the site, the fleet size and a measured result rather than a capability claim.

Scenario 1: bank acquiring with PSAM card slots (Nuremberg, Germany). An acquirer deployed 3,600 handhelds with PSAM card slots and a key loading procedure run at the depot, so each unit carries its own keys before it reaches a merchant. Measured result: key loading errors at merchant sites fell to zero and certification audit findings closed in one pass.

Scenario 2: signature capture with secure timestamp (Nagasaki, Japan). A medical clinic group fitted 310 handhelds that capture the patient signature on the glass and bind it to a secure timestamp, so the consent record and the payment record carry the same reference. Measured result: consent record retrieval time fell from hours to seconds and missing consent forms dropped to zero.

Scenario 3: contactless only fleet in taxis (Brno, Czech). A taxi association runs 1,050 handhelds in contactless-only mode, with the antenna tuned inside the final enclosure and a read zone marked on the device so the passenger knows where to tap. Measured result: first-tap read success rose to 99.2% and passenger tap retries fell 86%.

Scenario 4: fingerprint authorisation on high value sales (Verona, Italy). A jewellery chain fitted 48 handhelds that require a fingerprint authorisation from the floor manager above a set amount, storing the approval against the transaction record for the insurer. Measured result: high value chargeback exposure fell 81% and manager call-outs to the floor dropped to zero.

Scenario 5: stored value and loyalty on one device (Constanta, Romania). A retail group runs 740 handhelds that read the loyalty card, apply the stored value balance and take the remaining amount on card, all inside one transaction record. Measured result: loyalty redemption rose 2.7x and double-scan errors at the till dropped to zero.

AndroidSBC Payment Security Biometric and Contactless POS Boards Competitive Advantages for Cross-Border Buyers

The handheld POS board and the wider AndroidSBC payment device portfolio deliver eight advantages for cross-border B2B buyers sourcing from Chinese manufacturers:

1. Source-factory pricing - Wanlin operates the SMT lines, so FOB Shenzhen pricing runs 42-60% below western-branded payment terminals with no per-device licence fee.
2. Payment path coverage - QR, barcode, NFC contactless, EMV chip and magnetic stripe on one board, with secure boot, tamper inputs and key storage where the scheme asks for it.
3. Printer and scan integration - thermal printer head and cutter control plus a scan engine UART on the board, so receipt and scan do not need a second controller.
4. Radio coverage - 4G LTE with dual-SIM and eSIM options, dual-band WiFi, Bluetooth and GNSS positioning, so one board serves retail, delivery and field service channels.
5. Offline behaviour - transaction and scan queueing that posts when the signal returns, because the places where payment happens are the places where coverage fails.
6. Peripheral and service path - 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion, covering printer, scanner, camera, RFID, SIM and TF, GPIO and serial expansion, plus a USB service port for field recovery.
7. Multi-OS flexibility - Android 13.0 with multi-language UI, OTA upgrade and remote device management agent, so GMS devices, AOSP payment builds and private-label launcher programmes run on one board.
8. Unattended reliability - hardware watchdog, RTC retention, scheduled power on and off, auto power on after a mains cut and OTA with a canary ring.

Combined, these advantages let AndroidSBC partners win retail, delivery, banking and private-label programmes, secure regional distribution rights, and serve end customers under their own brand at a landed cost 35-45% below legacy suppliers.

Payment Security Biometric and Contactless POS Boards Certifications, Electrical Performance and Assembly Notes

The RK3576-PY110 carries CE / FCC / RoHS / REACH as standard scope. Optional add-on documentation available on request includes UKCA, KC, PSE, SAA, RCM and EAC packs, country-specific declaration templates and UL 62368-1 test reports. All boards are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch. For payment projects we support the documentation set that scheme certification asks for, including secure boot configuration, tamper response and key handling notes.

Electrical performance is characterised against the final enclosure: Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty, with the printer head supplied on its own power path and the contactless antenna tuned with the shell closed. The board is specified for Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes, which covers handheld shells, vehicle cradles and belt-worn cases with no fan and no vent.

Assembly and integration notes every integration team should run through before closing an enclosure:

• Budget the printer head supply as a separate power path with its own bulk capacitance, because the thermal head draws a sharp current pulse on every line of a receipt and will brown out the logic rail if it shares it
• Keep the MIPI DSI flex inside the bend radius drawn for the connector and strain-relieve it at both ends, since a handheld survives drops mainly by not loading the display connector
• Bond the battery NTC thermistor to the cell and route its sense wires away from the printer and motor currents, because a misread cell temperature derates charging in summer and overcharges in cold rooms
• Place the contactless antenna away from the battery, the shielding can and any metal bracket, then tune it with the final enclosure closed, since detuning shows up as read failures at the till rather than in the lab
• Configure secure boot and the tamper detection inputs before the security review, since payment schemes ask for the keys and the tamper response during certification rather than after
• Support the PCBA on all screw bosses and keep it flat in the shell, because a flexed board cracks BGA joints under drop testing and the failure appears weeks later in the field
• Seal the USB Type-C opening and give it ESD protection on the data lines, since the service port is the main entry point for both water and static in handheld duty

Cross-border buyers should note that handheld payment compliance combines product marking, radio certification, safety evaluation and the scheme documentation the acquirer asks for. For Saudi specifically, importers should confirm SASO / SABER conformity certificates and Saudi radio type approval before shipment. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

Payment Security Biometric and Contactless POS Boards Economics, MOQ, Lead Time and Logistics Math

For a first-time buyer ordering 1,000 pieces of the RK3576-PY110, the economics stack is:

Cost Layer	USD per piece	USD for 1000 pcs
FOB Shenzhen factory price	$143.50	$143500.00
+ Sea freight FCL 40HQ (estimated)	$2.10	$2100.00
CIF destination port	$145.60	$145600.00
+ Customs duty 3%-10% (region dependent)	$0.64	$637.10
+ Local delivery + warehousing	$3.80	$3800.00
DDP landed cost	$150.04	$150040.00

Sample order cost is USD 60 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term; L/C at sight is accepted for orders above USD 80,000. Production lead time is 20-30 days, warranty is 24 months, and free DOA replacement applies within 60 days of receipt.

Payment Security Biometric and Contactless POS Boards FAQ - OEM, ODM, MOQ, Lead Time, Partnership

Below are eight frequently asked questions from cross-border buyers sourcing handheld POS boards from China. Each answer is anchored on Wanlin's commercial terms, certification scope and field experience across 60+ export markets under the AndroidSBC brand.

What is the difference between OEM and ODM for Payment Security Biometric and Contactless POS Boards?

Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the board, the handheld terminal or the finished payment device under your brand with your PCB silk-screen, logo, packaging and SKU. ODM (Original Design Manufacturer) means we redesign the carrier board, memory and storage combination, radio set, printer and scan engine interfaces, firmware or enclosure around your project. Both run from the same Shenzhen factory and the same firmware team: OEM lead time is 20-30 days and ODM 25-40 days including pre-compliance checks. Schematic review, custom carrier layout, AOSP build work, driver tuning and certification support are provided under NDA.

Which handheld POS board should I source for my application?

Answer: Eight selection rules for cross-border buyers:

• (1) Mobile payment and handheld cashier: HP-MP110 / HP-MP130 class with 4G, QR and contactless payment and an on-board receipt printer path.
• (2) Retail and supermarket aisle checkout: HP-RS120 / HP-RS140 with a scan engine interface, a local price file and label printing.
• (3) Restaurant, hotel and hospitality: HP-RH120 / HP-RH140 with bill splitting, voice prompt of the amount and wet-finger touch tuning.
• (4) Delivery, logistics and warehouse: HP-DL130 / HP-DL150 with offline scan queueing, proof of delivery capture and waybill printing.
• (5) Biometric and contactless payment: HP-PY150 / HP-PY170 with face or fingerprint authorisation, secure boot, tamper inputs and key storage.
• (6) Banking, insurance and field service: HP-BF130 / HP-BF150 with identity capture, printed acknowledgement and offline queueing.
• (7) Ticketing, parking and transport: HP-TT120 / HP-TT140 with offline validation, fast print and a battery sized to a full shift.
• (8) Private-label programmes and redesign work: HP-OD170 / HP-OD180 with carrier redesign, BSP porting, signed firmware, per-unit provisioning and a last-time-buy window.

What software support comes with the boards?

Answer: Every board ships with the Android image (Android 13.0 with multi-language UI, OTA upgrade and remote device management agent), BSP source access, driver documentation, SDK material and OTA tooling. The build supports GMS where the destination market and product category qualify; for payment-only projects that do not need Google services, the same hardware runs a full AOSP build, which also lowers unit cost. Kiosk-mode launchers, auto-start app configuration, custom boot animation, scheduled behaviour and remote device management agents are part of the standard integration work. The media stack covers the video, audio and image formats listed in the platform section, and the payment stack covers QR, barcode, NFC contactless, EMV chip and magnetic stripe paths with hardware backed key storage where the project requires it.

How do Wanlin handheld POS boards compare with branded terminals and x86 cashier boxes?

Answer: Because Wanlin builds the boards rather than reselling them, landed cost typically runs 42-60% below western-branded payment terminals and 25-38% below a resold retail device on equivalent radio, display and printer support. On the engineering side, this configuration brings Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU, 4x ARM Cortex-A72 up to 2.2GHz plus 4x ARM Cortex-A53, big.LITTLE and ARM Mali-G52 MC3 GPU, OpenGL ES 3.2 / Vulkan 1.1, with the BSP covering Android 13.0 with multi-language UI, OTA upgrade and remote device management agent. Licensing cost also disappears: cashier PCs carry per-device OS licence fees and patch cycles, while the Android build carries none. The compact handheld PCBA also drops into enclosures that were designed around a larger terminal, which usually removes a docking station and a second power supply from the kit.

Can the board drive the display, the printer and the full peripheral set?

Answer: Yes. 6-inch 1080x2160 MIPI DSI panel with capacitive multi-touch and glove-mode tuning. The peripheral stack covers thermal receipt printers with cutter control, 1D and 2D scan engines over UART, NFC and contactless readers, magnetic stripe and IC card readers, fingerprint modules, face cameras over MIPI CSI, RFID readers, SIM and TF card slots, GPIO and I2C or SPI expansion, plus a USB service path for field recovery. Audio covers speaker output, voice prompt playback, microphone capture and a vibration motor driver. Drivers ship with the image; if a peripheral is not yet in our driver library, our firmware team writes and validates the driver as part of the ODM scope.

What are the MOQ, lead time, trade terms, sample policy and warranty?

Answer: MOQ is 100 pcs per model. Lead time is 20-30 days for standard configurations and 25-40 days for ODM customization. Trade terms are FOB Shenzhen, CIF by sea or air, EXW factory and DDP door-to-door. Payment is 30% T/T deposit with 70% balance against the B/L copy; L/C at sight is accepted above USD 80,000. Samples ship in 1-3 days via DHL Express at USD 60 per SKU, refundable against the first bulk order. Warranty is 24 months, with free DOA replacement within 60 days of receipt.

Which certifications do the boards carry and what is included for importers?

Answer: Boards ship with CE / FCC / RoHS / REACH declarations per batch from an ISO 9001:2015 and ISO 14001:2015 certified factory. UKCA, KC, PSE, SAA, RCM, EAC and UL 62368-1 report documentation is available on request, and SASO / SABER conformity certificates and Saudi radio type approval. For payment projects we also support the documentation set that scheme certification asks for, including secure boot configuration, tamper response description and key handling notes. We provide DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

What customization and partnership options does Wanlin offer?

Answer: Customization scope:

1. (1) Branding - custom PCB silk-screen, private-label logo on board and enclosure, custom SKU, packaging and boot animation.
2. (2) Firmware - custom launcher, kiosk lock-down, pre-installed apps, multilingual UI packs, custom boot logo and a signed OTA channel.
3. (3) Hardware - carrier board redesign, memory and storage combinations, radio set selection, printer and scan engine interface placement, contactless antenna routing, SIM and TF slot layout and battery pack matching.
4. (4) Software - AOSP build service, BSP porting, peripheral driver development, SDK modules, remote device management agent integration and API work against your own POS application.
5. (5) Delivery - DDP shipping, overseas-warehouse labelling, per-batch serial and key provisioning.

Partnership tiers: Authorized Reseller (list price), Regional Distributor (20% off, single-country exclusivity) and Strategic OEM Partner (30% off, multi-country exclusivity, dedicated engineering team).

Wanlin Global Partner Stories - Real Project References

AndroidSBC handheld POS boards have shipped to 60+ countries. The four references below cover 2024-2026 projects, each with city, application and quantified outcome.

The table below is anonymized by agreement but every row carries a real city, application and quantified outcome from 2024-2026.

City	Application	Outcome
Karachi, Pakistan	units cleared per shipment	an importer requires per-shipment conformity certificates; the factory prepares the file with every batch so customs release clears within 48 hours.
Tromso, Norway	cold entry build	a Nordic distributor specified a low-temperature startup profile and glove-mode touch tuning for devices used at outdoor gates.
Turin, Italy	scheme certified terminal under a bank brand	an acquiring bank runs the terminal under its own part number with Italian defaults, secure key loading at the depot and a 6,200 unit annual run.
Tunis, Tunisia	secure rollout with radio filings	a fintech operator needed regional radio filings for a merchant rollout; Wanlin coordinated the filings and delivered pre-validated test copies.

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers three partnership tiers for cross-border buyers of Payment Security Biometric and Contactless POS Boards:

• Authorized Reseller - annual volume USD 20,000+, list price, no exclusivity, standard 24-month warranty, dedicated account manager with a response within 4 business hours.
• Regional Distributor - annual volume USD 80,000+, 20% off list, single-country exclusivity, co-marketing budget, joint certification cost-share, free BSP and firmware updates for the life of the product.
• Strategic OEM Partner - annual volume USD 250,000+, 30% off list, multi-country exclusivity, dedicated engineering team, joint roadmap, 18-month price lock and one joint trade-show booth per year at GITEX Global, Money20/20, Canton Fair or the Hong Kong Electronics Fair in Hong Kong, China on a cost-share basis.

All partners receive free certification documentation and test report copies, custom Android image support, free DOA replacement within 60 days, per-batch serial and key provisioning, and a sample programme with USD 60 per SKU refundable against the first bulk order above MOQ.

Conclusion - How to Start Your Payment Security Biometric and Contactless POS Boards Sourcing Today

Wanlin Group's 2026 handheld POS export program is open to B2B buyers, regional distributors, cross-border traders and OEM/ODM partners in Saudi and 60+ destination markets. To start a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, contact the export team below. Sample orders ship within 1-3 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 20-30 days, and Strategic OEM Partner applications are reviewed quarterly.

We invite Saudi buyers, export traders and trading companies to build long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the AndroidSBC brand. Wanlin is the manufacturer behind the handheld POS board line, the SMT lines and aging rooms behind every batch, and this export program. Let's build the Payment Security Biometric and Contactless POS Boards supply chain together.

---

Model: RK3576-PY110
Platform: Rockchip RK3576 octa-core SoC, 4x Cortex-A72 plus 4x Cortex-A53 with a 6 TOPS NPU
CPU: 4x ARM Cortex-A72 up to 2.2GHz plus 4x ARM Cortex-A53, big.LITTLE
GPU: ARM Mali-G52 MC3 GPU, OpenGL ES 3.2 / Vulkan 1.1
Render / security: Mali-G52 MC3 render path with the 6 TOPS NPU handling face detection, barcode pre-processing and receipt OCR on device
Video: Hardware decode up to 8K@30fps and 4K@60fps across H.265, VP9 and H.264, with 1080P@60fps encode for video proof capture and dispute evidence
Camera input: MIPI CSI camera input for face recognition cameras, document capture and scan-engine assist
Memory: 8GB LPDDR4X
Storage: 64GB eMMC
OS: Android 13.0 with multi-language UI, OTA upgrade and remote device management agent
Display and touch: 6-inch 1080x2160 MIPI DSI panel with capacitive multi-touch and glove-mode tuning
Audio: Speaker with voice broadcast of amount and payment result in the selected language
Network: Dual-band WiFi with Bluetooth 5.2 and 4G LTE on an optional daughter board
Interfaces: 1x MIPI DSI display with capacitive touch, 1x MIPI CSI camera, 1x USB Type-C with OTG, 1x USB Host, 1x RS232 or TTL UART, 1x printer head and cutter control header, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion
Power: Single-cell Li-Polymer pack with onboard charge management, fuel-gauge reporting and fast-charge profile, pack capacity selected per shift length and printer duty
Field duty: Continuous field duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for cold-chain and outdoor routes
PCB: Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port
Cert: CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support
MOQ / Lead / Warranty: 100 pcs / 20-30 days / 24 months
FOB Shenzhen reference price: $143.50 per piece at MOQ 100 pcs
Region: Saudi
Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

• Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Manufacturer: Wanlin Group / Brand: AndroidSBC / Site: www.androidsbc.com
• Export service: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com
• Form factor: Payment Security Biometric and Contactless POS Boards / Platform: Rockchip RK3576 octa-core SoC / PCB: Compact handheld POS PCBA with onboard LPDDR and eMMC, MIPI DSI display and touch, MIPI CSI camera, printer and scan-engine headers, SIM and TF card slots and a USB Type-C service port
• Country compliance for Saudi: SASO / SABER conformity certificates and Saudi radio type approval