X9 20-point touch board Flagship for Pakistan Buyers - Wholesale Interactive Touch and Education Con

From September 24, 2026, Pakistan display brands, terminal builders and signage integrators can source the X9-IT180 straight from Wanlin Group (Shenzhen, China), Allwinner A133 quad-core SoC (X9 board platform), 1GB LPDDR4 + 16GB eMMC, Hardware 4K@30fps H.265 / H.264 / VP9 decode, Android 10 / Android 12, MIPI DSI panel drive, under the 2026 Interactive Touch and Education Conference Boards program: Interactive Touch and Education Conference Boards, X9-IT180, 1GB LPDDR4 + 16GB eMMC, with touch all-in-one panels, teaching and conference screens, exhibition guidance points and interactive displays that run plug-and-play touch with no field calibration, configured to the needs of Interactive Touch and Education Conference Boards. Wanlin Group as the X9 Android board supplier, exporter and original manufacturer now serves local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets, and the Interactive Touch and Education Conference Boards program is open to Pakistan buyers ordering at factory-direct terms.

Core parameters: Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class. CPU 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit. GPU Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1. Render and decode path GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout. Video decode Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode. Camera input MIPI-CSI camera input for face recognition modules, QR scanners and USB industrial cameras. Memory and storage 1GB LPDDR4 + 16GB eMMC. Operating system Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux. Display output MIPI DSI output on a 30-pin 0.5 mm connector with backlight jumper selection. Audio output PH headphone output plus amplified left and right channel speaker output. Interfaces and I/O USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button. Networking 10M/100M adaptive Ethernet RJ45 plus 2.4G WiFi module. Power input DC 12 V single-rail input, 100 mV ripple tolerance, 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A peripheral rails. Operating temperature -20 to +70 deg C, up to 80% relative humidity. PCB 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes. Certifications CE / FCC / RoHS / REACH. Wanlin's 2026 export roadmap for Pakistan also covers custom memory and storage combos, single and dual LVDS configurations, MIPI panel tuning, custom peripheral drivers, private-label branding and per-destination certification documentation packages.

Executive Summary - Interactive Touch and Education Conference Boards Export for Global B2B Buyers

Executive summary - 10 buyer-relevant points:

• Featured model X9-IT180, Interactive Panel Boards, Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class
• CPU 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit
• GPU Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1
• Render and decode path GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout
• Video decode Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode
• Memory and storage 1GB LPDDR4 + 16GB eMMC
• OS Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux
• Display MIPI DSI output on a 30-pin 0.5 mm connector with backlight jumper selection
• MOQ 100 pcs, lead time 18-25 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
• Field reference: exhibition hall guidance with multilingual flow - visitor direction questions fell 57%
• Target buyer: interactive flat panel makers, education technology vendors, conference equipment manufacturers, exhibition contractors and regional Android board distributors
• Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

What follows is the fact set Wanlin shares with Interactive Touch and Education Conference Boards buyers before quotation: scope, commercial terms, compliance route and field record. Wanlin Group operates its own 12,000 m2 manufacturing facility in Shenzhen with 8 SMT lines, 4 AOI inspection stations and 2,400 m2 of cleanroom assembly, exporting X9 Android boards to 60+ countries under the AndroidSBC brand. Total cost of ownership for an AndroidSBC Interactive Touch and Education Conference Boards deployment typically runs 40-55% below x86-based terminal builds once per-device OS licensing and patch handling are counted. For Pakistan, this article maps the model line, the economics and the compliance route specific to your market.

Global Interactive Touch and Education Conference Boards Market Overview and 2026 Buyer Demand

Buyers shortlisting interactive boards rank plug-and-play touch behaviour, multi-point accuracy and panel rotation handling above unit price, One board across classroom, conference and guidance panels cuts spare-part SKUs by 60% and keeps one image to validate.

Regional compliance for Pakistan is anchored on PTA type approval and PSQCA-oriented conformity documentation. Cross-border buyers are advised to verify the certification scope, the panel driver behaviour and the software build of every board before import, since some China-supplied boards ship without destination radio approval or without the licensed Android build the project actually needs, and either gap can stall customs clearance or a site handover.

Reference: X9 Android board datasheet V2.0, Allwinner A133 reference manual, Wanlin Group 2026 commercial display hardware export program documentation, field deployment records 2024-2026.

Interactive Touch and Education Conference Boards Engineering Architecture and Hardware Platform

The X9 family is engineered on three pillars: (1) an Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class compute block with GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout; (2) a display, camera and peripheral pipeline built around Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode; (3) a software layer pairing Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux with publishing management, OTA tooling and the Allwinner Tina Linux BSP, AOSP build support and the AndroidSBC SDK kit. This architecture delivers continuous 24/7 display duty at a cost point that undercuts x86 media players while keeping the touch responsiveness and panel timing integrators expect.

Three sub-modules define the engineering depth:

• Compute module - Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class. 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit handles sustained playback rendering, screen rotation and mixed media workloads in fanless enclosures.
• Display and camera module - MIPI DSI output on a 30-pin 0.5 mm connector with backlight jumper selection. Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode drives LVDS and MIPI panels directly, and the camera path serves face recognition modules, QR scanners and USB industrial cameras.
• Peripheral and management module - USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button. Headless operation is supported for display-only units fed over the site network, and the toolchain covers Allwinner Tina Linux BSP, AOSP build support and the AndroidSBC SDK kit, OTA upgrade, boot logo customization, pre-installed app support and launcher customization for remote fleet management.

Mechanically the board is a 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes, which is why it drops into enclosures originally drawn around a larger player box without a tooling change.

Featured Model - X9-IT180 Flagship Technical Signature

The featured model is X9-IT180, part of the Interactive Panel Boards family, configured in this batch with 1GB LPDDR4 memory and 16GB eMMC storage. FOB Shenzhen reference price is $58.50 per piece at MOQ 100 pcs, with bulk tier pricing from $50.31 to $65.52 depending on memory and storage combination, regional certification and packaging artwork. Lead time is 18-25 days from PO confirmation and 30% T/T deposit receipt, with a 24-month warranty.

The technical signature of X9-IT180 on this configuration is documented below. Every parameter is verified by our Shenzhen lab against the panel specifications of mainstream LCD vendors, the electrical limits of IEC / UL 62368-1 and the serial timing requirements of scanners, printers and lock controllers.

Specification	Value
soc_platform	Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class
cpu_core	4x ARM Cortex-A53 @ 1.6 GHz, 64-bit
gpu_3d	Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1
render_decode_path	GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout
video_decode	Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode
camera_input	MIPI-CSI camera input for face recognition modules, QR scanners and USB industrial cameras
memory_storage	1GB LPDDR4 + 16GB eMMC
os_android	Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux
display_out	MIPI DSI output on a 30-pin 0.5 mm connector with backlight jumper selection
audio_out	PH headphone output plus amplified left and right channel speaker output
interfaces_io	USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button
networking	10M/100M adaptive Ethernet RJ45 plus 2.4G WiFi module
power_input	DC 12 V single-rail input, 100 mV ripple tolerance, 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A peripheral rails
electrical_limits	300 mA typical working current (500 mA max), 10 mA typical standby (15 mA max), 350 mA USB supply
environment	-20 to +70 deg C, up to 80% relative humidity
pcb_mechanics	6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes
certifications	CE / FCC / RoHS / REACH
use_case	touch all-in-one panels, teaching and conference screens, exhibition guidance points and interactive displays that run plug-and-play touch with no field calibration

Interactive Touch and Education Conference Boards Application Scenarios across Deployment Sites

Deployment notes below come from live Interactive Touch and Education Conference Boards installations on several continents, each carrying a site, a unit count and a measured outcome.

Scenario 1: exhibition hall guidance with multilingual flow (Tbilisi, Georgia). An exhibition centre installed 21 units with Georgian-English-Russian switching, offline floor plans on the eMMC and a QR scanner for ticket validation. Measured result: visitor direction questions fell 57% and ticket validation errors dropped to zero.

Scenario 2: restaurant menu boards with staff edit (Guadalajara, Mexico). A restaurant group fitted 43 menu panels where staff edit prices from a tablet and the board applies the change at the next scheduled refresh, with no publishing server in the loop. Measured result: price update turnaround fell from 2 days to 15 minutes and wrong-price complaints dropped 81%.

Scenario 3: classroom panels in a school renewal program (Antwerp, Belgium). A school board fitted 148 panels with infrared touch frames reporting as HID, so teachers plug the panel in and write without any calibration step at install. Measured result: installation time per classroom fell 64% and touch calibration callouts dropped to zero.

Scenario 4: training rooms with 20-point touch tables (Busan, Korea). A training provider installed 14 horizontal tables with 20-point capacitive touch, portrait and landscape switching in image and a shared annotation app for group exercises. Measured result: session setup time fell 52% and touch dead-zone complaints dropped to zero.

Scenario 5: museum guidance points with child-height touch (Valletta, Malta). A museum fitted 17 units with resistive touch at child height and IR touch on the adult panel, both running as HID with no driver work per exhibit. Measured result: exhibit touch faults fell 87% and exhibit downtime during school season dropped to zero.

AndroidSBC Interactive Touch and Education Conference Boards Competitive Advantages for Cross-Border Buyers

The X9 board and the wider AndroidSBC commercial display portfolio deliver eight advantages for cross-border B2B buyers sourcing from Chinese manufacturers:

1. Source-factory pricing - Wanlin operates the SMT lines, so FOB Shenzhen pricing runs 40-55% below western-branded x86 media players with no per-device licence fee.
2. Panel interface coverage - single and dual LVDS direct drive at 50/60 Hz plus MIPI DSI on 30-pin and 40-pin connectors, with panel power selected by jumper, because the panel is the first thing an installer gets wrong.
3. Touch coverage with no debugging - capacitive, resistive, infrared and optical touch panels up to 20 points report as HID, so a touch layer swaps without driver work at the site.
4. Peripheral driver coverage - barcode and QR scanners, NFC and IC card readers, password keyboards, fingerprint readers, ID card readers, thermal printers and cameras ship with tested drivers and demo test programs.
5. Playback and publishing depth - loop, timed and interrupt playback modes with RTC-backed scheduling, plus support for the mainstream publishing software already used in the trade.
6. Counter-grade I/O - USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button, covering serial peripherals, GPIO relay and lock control, powered USB rails and wide-voltage input for 24-hour sites.
7. Multi-OS flexibility - Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux, so Android publishing projects and Linux controller builds run on one board.
8. Continuous-duty reliability - hardware watchdog, RTC, scheduled power on and off, auto-restart after power failure and 7x24 duty from -20 deg C to 70 deg C.

Combined, these advantages let AndroidSBC partners win display, signage, retail, access and industrial tenders, self-service programmes and private-label projects, secure regional distribution rights, and serve end customers under their own brand at a landed cost 35-45% below legacy suppliers.

Interactive Touch and Education Conference Boards Certifications, Electrical Performance and Assembly Notes

The X9-IT180 carries CE / FCC / RoHS / REACH as standard scope. Optional add-on documentation available on request includes UKCA, KC, PSE, SAA, RCM and EAC packs, country-specific declaration templates and UL 62368-1 test reports. All boards are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Electrical performance measured at the bench: 12 V input with 100 mV ripple tolerance, 300 mA typical working current rising to 500 mA maximum with panel and peripherals, 10 mA typical standby rising to 15 mA, 350 mA available on the USB supply, and peripheral rails rated at 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A. The board is specified for -20 to +70 deg C, up to 80% relative humidity, which covers unheated lobbies, dock doors and semi-outdoor enclosures without a fan.

Assembly and integration notes from chapter 5 of the datasheet, which every integration team should run through before closing an enclosure:

• Match the LVDS panel voltage to the panel power jumper and check the panel current draw before first power-up, also confirming pin 1 direction on the LVDS socket
• Verify backlight voltage and current, and feed any backlight above 20 W from a separate power board instead of the board backlight header
• Check peripheral IO levels before wiring USB, serial or GPIO devices, since a mismatched level damages the port rather than the peripheral
• Confirm serial port level selection and TX / RX wiring, because RS232 and TTL share the same 4-pin header on this board
• Land the supply on the DC input connector with correct polarity and size the input voltage and current against the total peripheral load
• Keep the bare board clear of short circuits against the enclosure during assembly
• Avoid striking board components while fixing, and never force a misaligned screw hole since board deformation cracks BGA joints

Cross-border buyers should note that public-space hardware compliance combines product marking, radio certification and safety evaluation. For Pakistan specifically, importers should confirm PTA type approval and PSQCA-oriented conformity documentation before shipment. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

Interactive Touch and Education Conference Boards Economics, MOQ, Lead Time and Logistics Math

For a first-time buyer ordering 1,000 pieces of the X9-IT180, the economics stack is:

Cost Layer	USD per piece	USD for 1000 pcs
FOB Shenzhen factory price	$58.50	$58500.00
+ Sea freight FCL 40HQ (estimated)	$3.40	$3400.00
CIF destination port	$61.90	$61900.00
+ Customs duty 3%-10% (region dependent)	$0.84	$842.84
+ Local delivery + warehousing	$5.60	$5600.00
DDP landed cost	$68.34	$68340.00

Sample order cost is USD 60 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term; L/C at sight is accepted for orders above USD 80,000. Production lead time is 18-25 days, warranty is 24 months, and free DOA replacement applies within 60 days of receipt.

Interactive Touch and Education Conference Boards FAQ - OEM, ODM, MOQ, Lead Time, Partnership

Below are eight frequently asked questions from cross-border buyers sourcing X9 Android boards from China. Each answer is anchored on Wanlin's commercial terms, certification scope and field experience across 60+ export markets under the AndroidSBC brand.

What is the difference between OEM and ODM for Interactive Touch and Education Conference Boards?

Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the X9 board, advertising player or finished commercial terminal under your brand with your PCB silk-screen, logo, packaging and SKU. ODM (Original Design Manufacturer) means we redesign the carrier board, memory and storage combination, I/O set, panel interface, firmware or enclosure around your project. Both run from the same Shenzhen factory and the same firmware team: OEM lead time is 18-25 days and ODM 25-40 days including pre-compliance checks. Schematic review, custom carrier layout, AOSP or Linux build work, panel driver tuning and certification support are provided under NDA.

Which X9 board should I source for my application?

Answer: Eight selection rules for cross-border buyers:

• (1) Advertising players and shopfront screens: X9-AV110 / X9-AV130 with loop, timed and interrupt playback plus a 4K decode path.
• (2) Commercial panels and publishing software: X9-CD120 / X9-CD140 with LVDS or MIPI panel drive, jumper-selected panel power and in-image rotation.
• (3) Vending, locker and O2O cabinets: X9-RT120 / X9-RT140 with lock feedback on GPIO, serial printers and offline order queues.
• (4) Public self-service points: X9-SS130 / X9-SS150 with cloud publishing, staged OTA rollout and offline content caching.
• (5) Access control and face recognition: X9-AC120 / X9-AC140 with camera bring-up, relay control on GPIO and a local audit trail.
• (6) Interactive and education panels: X9-IT150 / X9-IT170 with plug-and-play HID touch, multi-point accuracy and rotation handled in the image.
• (7) Industrial HMI and gateways: X9-IC120 / X9-IC140 with two RS232 or TTL channels, watchdog recovery and -20 to 70 deg C duty.
• (8) Private-label programmes and redesign work: X9-OD170 / X9-OD180 with carrier redesign, BSP porting, signed firmware, per-unit identity provisioning and a last-time-buy window.

What software support comes with the boards?

Answer: Every board ships with the Android 10 image alongside Linux support (Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux), BSP source access, driver documentation, SDK material and OTA tooling. The Android build ships with GMS / Play Store where the destination market and product category qualify; for projects that do not need Google services, the same hardware runs a full AOSP or Linux build, which also lowers unit cost. Kiosk-mode launchers, auto-start app configuration, scheduled power on and off, idle reset for demo units and remote publishing agents are part of the standard integration work. Loop, timed and interrupt playback modes ship enabled, and the media stack covers wmv, avi, flv, rm, rmvb, mpeg, ts and mp4 video with BMP, JPEG, PNG and GIF images.

How do Wanlin X9 boards compare with x86 media players and proprietary display boxes?

Answer: Because Wanlin builds the boards rather than reselling them, landed cost typically runs 40-55% below western-branded x86 media players and 25-35% below proprietary commercial display boxes on equivalent panel drive and playback support. On the engineering side, this configuration brings Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class, 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit and Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1, with the BSP covering Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux. Licensing cost also disappears: media PCs carry per-device OS licence fees and patch cycles, while the Android build carries none. The 120 x 75 mm 6-layer board also drops into enclosures that were designed around a player box, which usually removes an external scaler and one power supply per screen.

Can the board drive LVDS and MIPI panels and the full peripheral set?

Answer: Yes. MIPI DSI output on a 30-pin 0.5 mm connector with backlight jumper selection. The peripheral stack covers barcode and QR scanners on USB or serial, NFC and IC card readers, PIN pad and password keyboard modules, thermal receipt and label printers, fingerprint readers, ID card readers, cameras on MIPI-CSI or USB, infrared receivers, relays and lock drivers on GPIO, plus speakers, amplifiers and microphones on the audio path and ambient sensors on I2C. Touch panels report as HID, so capacitive, resistive, infrared and optical screens run without field debugging. Drivers ship with the image; if a peripheral is not yet in our driver library, our firmware team writes and validates the driver as part of the ODM scope.

What are the MOQ, lead time, trade terms, sample policy and warranty?

Answer: MOQ is 100 pcs per model. Lead time is 18-25 days for standard configurations and 25-40 days for ODM customization. Trade terms are FOB Shenzhen, CIF by sea or air, EXW factory and DDP door-to-door. Payment is 30% T/T deposit with 70% balance against the B/L copy; L/C at sight is accepted above USD 80,000. Samples ship in 1-3 days via DHL Express at USD 60 per SKU, refundable against the first bulk order. Warranty is 24 months, with free DOA replacement within 60 days of receipt.

Which certifications do the boards carry and what is included for importers?

Answer: Boards ship with CE / FCC / RoHS / REACH declarations per batch from an ISO 9001:2015 and ISO 14001:2015 certified factory. UKCA, KC, PSE, SAA, RCM, EAC and UL 62368-1 report documentation is available on request, and PTA type approval and PSQCA-oriented conformity documentation. We provide DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets. GMS certification support is available where the destination requires Google Play distribution.

What customization and partnership options does Wanlin offer?

Answer: Customization scope:

1. (1) Branding - custom PCB silk-screen, private-label logo on board and enclosure, custom SKU, packaging and boot animation.
2. (2) Firmware - custom launcher, kiosk lock-down, pre-installed apps, multilingual UI packs, custom boot logo and OTA channel.
3. (3) Hardware - carrier board redesign, extra serial channels, custom connector maps, memory and storage combinations (1GB-2GB LPDDR4, 8GB-32GB eMMC), single or dual LVDS output, MIPI 30-pin or 40-pin selection, touch panel tuning for PCAP, resistive, IR and optical overlays, 3G / 4G module options and GPIO, SPI, PWM, ADC and I2C expansion.
4. (4) Software - AOSP build service, Linux BSP porting, panel and peripheral driver development, SDK modules, remote publishing agent integration and playback mode configuration.
5. (5) Delivery - DDP shipping, FBA or overseas-warehouse labelling, per-batch MAC and serial provisioning.

Partnership tiers: Authorized Reseller (list price), Regional Distributor (20% off, single-country exclusivity) and Strategic OEM Partner (30% off, multi-country exclusivity, dedicated engineering team).

Wanlin Global Partner Stories - Real Project References

Partner projects below span 2024-2026 across 60+ destination markets. Each row carries a city, the application and the outcome the buyer measured.

The table below is anonymized by agreement but every row carries a real city, application and quantified outcome from 2024-2026.

City	Application	Outcome
Dubai, UAE	interactive board with import documentation	an education supplier needed conformity paperwork before a school tender; Wanlin supplied the test-report package and label artwork in nine working days.
Manila, Philippines	panel boards cleared per shipment	a classroom technology distributor requires per-shipment conformity certificates; the factory prepares the file with every batch so customs release clears within 48 hours.
Porto, Portugal	private-label panel board for an education vendor	an education vendor private-labels the board with Portuguese classroom defaults, its own boot animation and per-unit touch parameters on a 2400 unit annual run.
Cordoba, Argentina	board with a local filing support	a reseller needed local radio filings for a school district rollout; Wanlin coordinated the filings and delivered pre-validated test copies.

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers three partnership tiers for cross-border buyers of Interactive Touch and Education Conference Boards:

• Authorized Reseller - annual volume USD 20,000+, list price, no exclusivity, standard 24-month warranty, dedicated account manager with a response within 4 business hours.
• Regional Distributor - annual volume USD 80,000+, 20% off list, single-country exclusivity, co-marketing budget, joint certification cost-share, free BSP and firmware updates for the life of the product.
• Strategic OEM Partner - annual volume USD 250,000+, 30% off list, multi-country exclusivity, dedicated engineering team, joint roadmap, 18-month price lock and one joint trade-show booth per year at GITEX Global, Smart City Expo World Congress, Canton Fair or the Hong Kong Electronics Fair in Hong Kong, China on a cost-share basis.

All partners receive free certification documentation and test report copies, custom Android image support, free DOA replacement within 60 days, per-batch MAC and serial provisioning, and a sample programme with USD 60 per SKU refundable against the first bulk order above MOQ.

Conclusion - How to Start Your Interactive Touch and Education Conference Boards Sourcing Today

Wanlin Group's 2026 X9 export program is open to B2B buyers, regional distributors, cross-border traders and OEM/ODM partners in Pakistan and 60+ destination markets. To start a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, contact the export team below. Sample orders ship within 1-3 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 18-25 days, and Strategic OEM Partner applications are reviewed quarterly.

We invite Pakistan buyers, export traders and trading companies to build long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the AndroidSBC brand. Wanlin is the manufacturer behind the X9 board line, the SMT lines and aging rooms behind every batch, and this export program. Let's build the Interactive Touch and Education Conference Boards supply chain together.

---

Model: X9-IT180
Platform: Allwinner A133 quad-core SoC (X9 board platform), 28 nm process, commercial display class
CPU: 4x ARM Cortex-A53 @ 1.6 GHz, 64-bit
GPU: Imagination PowerVR GE8300 GPU, OpenGL ES 3.2 / Vulkan 1.1
Render / decode: GPU-assisted decode and render pipeline handling 4K playback, image rotation and multi-screen layout
Video: Hardware 4K@30fps H.265 / H.264 / VP9 decode, 1080p H.264 encode
Camera input: MIPI-CSI camera input for face recognition modules, QR scanners and USB industrial cameras
Memory: 1GB LPDDR4
Storage: 16GB eMMC
OS: Android 10 / Android 12, Linux (Ubuntu 22.04) and Tina Linux
Display: MIPI DSI output on a 30-pin 0.5 mm connector with backlight jumper selection
Audio: PH headphone output plus amplified left and right channel speaker output
Network: 10M/100M adaptive Ethernet RJ45 plus 2.4G WiFi module
Board I/O: USB0 OTG plus USB1 / USB2 / USB3 (two USB HOST headers and two USB A sockets), 2x RS232 or TTL selectable serial ports on 4-pin 2.0 mm headers, I2C touch header, IR receiver header, GPIO / SPI / PWM / ADC expansion, TF card socket and UBOOT burn button
Power: DC 12 V single-rail input, 100 mV ripple tolerance, 3.3 V / 800 mA, 5 V / 2 A and 12 V / 2 A peripheral rails
Temperature: -20 to +70 deg C, up to 80% relative humidity
PCB: 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes
Cert: CE / FCC / RoHS / REACH
MOQ / Lead / Warranty: 100 pcs / 18-25 days / 24 months
FOB Shenzhen reference price: $58.50 per piece at MOQ 100 pcs
Region: Pakistan
Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

• Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Manufacturer: Wanlin Group / Brand: AndroidSBC / Site: www.androidsbc.com
• Export service: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com
• Form factor: Interactive Panel Boards / Platform: Allwinner A133 quad-core SoC (X9 board platform) / PCB: 6-layer PCB, 120 x 75 mm, 1.6 mm board thickness, 4x phi 3 mm mounting holes
• Country compliance for Pakistan: PTA type approval and PSQCA-oriented conformity documentation