RK3588 Custom Android 14 Board, WF-C3588-K4, AndroidSBC, Ho Chi Minh City

TL;DR: RK3588 Custom Android 14 Board

SHENZHEN, China, September 12, 2026 - The WF-C3588-K4 board cleared the Longgang aging bench this week in lot 460, a 26,895-unit run for Ho Chi Minh City, Vietnam, and moved straight to the container yard.

AndroidSBC factory capacity report for the nine-variant WF-C3588 line serving Ho Chi Minh City, Vietnam. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Ho Chi Minh City and Vietnam buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For Vietnam importers, the line covers the custom board categories a Ho Chi Minh City distributor is most often asked to quote.

WF-C3588-K4 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-K4 (Custom Kiosk and POS Terminal Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Vietnam importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-K4-B) variant is the typical configuration for the custom self-service and POS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Kiosk and POS Terminal Board for Vietnam Buyers

Buyers in Ho Chi Minh City who have run the custom kiosk and pos terminal board category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 26,895-unit order can look cheap on paper and expensive in a slipped quarter. Then comes the firmware question. The hardware spec is straightforward to verify; whether the board holds a credential-locked stack through a 72-hour loop and a field OTA is a different test, and it is normally the Ho Chi Minh City buyer's warehouse that discovers the answer.

Documentation closes the list. Buyers in Ho Chi Minh City have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from self-service kiosks, ordering terminals, checkout systems, vending machines, parcel lockers, smart lockers, unattended retail, and POS registers, with three memory configurations per variant, so a Ho Chi Minh City buyer can usually match a requirement from the standard custom range.

Compliance for Vietnam is handled at the factory rather than after arrival. In Vietnam MIC type approval and the CR conformity mark are both required, and the approval is held by a Vietnamese importer. The Longgang export desk builds the destination-market file for MIC type approval with the CR conformity mark administered by MIC Vietnam and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Cat Lai Terminal, Ho Chi Minh City on the Cat Lai to Shekou lane.

Competitive Comparison: WF-C3588-K4 vs Competing RK3588 Boards

The comparison set for the custom kiosk and pos terminal board socket splits three ways: catalogue boards priced low with fixed everything, re-badged boards that cannot answer a schematic question, and custom platforms that take the I/O, memory and firmware changes in stride. The WF-C3588-K4 sits in the third group, differentiated by Rockchip RK3588, by customization depth, and by the factory-side certified image burn.

• vs standard SBCs in kiosks: the WF-C3588-K4 arrives with the serial bank, the payment profile and the kiosk ROM already in place, so the integrator does not build a stack from parts.
• vs POS chipset vendors: the 6 TOPS NPU adds vision features on the same board that runs the till, without a second compute module.
• vs turnkey terminal importers: the board-level customization path lets a kiosk brand change the I/O and the firmware without changing the terminal factory.
• vs unbranded boards: per-unit barcodes and burn-in records give the estate a real RMA trail instead of a swap-and-hope process.

Global Custom Kiosk and POS Board Market Trends

Order timing in Ho Chi Minh City now tracks the Custom Kiosk and POS Board curve rather than the calendar-year budget. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR through 2030 (MarketsandMarkets, 2025-2030), the silicon baseline that Vietnam buyers keep on the desk when they negotiate custom board allocation. Three patterns are visible in the WF-C3588 book:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-K4 board carries that headroom without a board change.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.

For the Custom Kiosk and POS Board category the practical signal in Vietnam is that framework agreements are replacing spot buying, and the agreements are getting longer.

Taken together, the three patterns explain why Vietnam buyers are moving from single orders to twelve-month framework agreements with a monthly lot cadence, especially on custom board programmes that cannot absorb a supply gap.

Partner Success Story: Northlight Robotics in Ho Chi Minh City, Vietnam

Northlight Robotics, an AMR and AGV maker serving the Vietnam market, deployed 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout. The rollout covered the self-service ordering kiosk, smart vending machine, and age-gate terminal workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 7,800 custom WF-C3588-R5 robotics controller boards for a warehouse fleet rollout
• Region: Ho Chi Minh City, Vietnam
• Models used: WF-C3588-K4 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Nansha with the Wanlin Group Longgang source factory named on the export declaration, entering Cat Lai Terminal, Ho Chi Minh City via the Cat Lai to Shekou lane

"We handed over our sensor list and got back a carrier with the LiDAR serial bank and the motor CAN routed exactly to spec. SLAM runs on the NPU on the same board that drives the wheels, which removed an entire controller from the chassis."

- Park Ji-hoon, Technical Director

Field Report: SMT line No.3 at the Wanlin Longgang plant, with operators loading Rockchip RK3588-based WF-C3588-K4 boards for the 26,895-unit order bound for Ho Chi Minh City

Reporter Li Jian, on the ground in Ho Chi Minh City, Vietnam. Wanlin Longgang SMT line No.3 put the lot through three AOI passes and an X-ray inspection on every BGA package before it reached the burn-in rack. The WF-C3588-K4 boards then cleared 48 hours of thermal cycling between -20C and 70C with the decoder loaded against a stress stream. Final yield came in at 99.06 percent.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-C3588-K4 units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering MIC type approval with the CR conformity mark administered by MIC Vietnam, cleared for entry at Cat Lai Terminal, Ho Chi Minh City on the Cat Lai to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Vietnam importers can hand straight to their customs broker.

Filed by Li Jian, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-K4 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-K4 (Custom Kiosk and POS Terminal Board) as the lead SKU for Ho Chi Minh City and Vietnam programmes:

• Self-service ordering kiosk: a QSR estate runs ordering terminals with a locked launcher and nightly OTA updates.
• Checkout and POS register: a retail chain drives the register, the scanner bank and the payment terminal from one board.
• Smart vending machine: an operator adds shelf-camera stock checks with the NPU and cuts route visits by a third.
• Parcel locker bank: a locker network runs door control and a camera per bay on the multi-serial I/O profile.
• Ticketing kiosk: a transit operator prints tickets and reads QR passes on an offline-capable terminal.
• Age-gate terminal: a licensed venue runs on-device face age estimation with no cloud round trip.
• Unattended retail store: a smart store runs entry gates, shelf cameras and checkout analytics on one board class.
• Queue analytics display: a bank branch counts queues locally and posts wait times to the lobby screen.

Partnership Models for Ho Chi Minh City Buyers

For Ho Chi Minh City importers and brand owners, the WF-C3588-K4 and the rest of the WF-C3588 custom variants are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a Vietnam partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. The usual first order on the WF-C3588-K4 is the 8GB + 64GB (WF-C3588-K4-B) configuration at MOQ 5,000 units, samples in 1-3 days on standard variants and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Vietnam buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Vietnam partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for Vietnam, and who handles them?

Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a Vietnam market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a Vietnam programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-K4 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Vietnam integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-K4 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Ho Chi Minh City and Vietnam. Direct factory contact for the custom kiosk and pos terminal board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: MIC type approval with the CR conformity mark for Vietnam, administered by MIC Vietnam, entering at Cat Lai Terminal, Ho Chi Minh City on the Cat Lai to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start a custom review, send the target volume, the I/O and memory changes required, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.